Radwin 2000 D+ - Table 15-1 Port Settings - I

RADWIN2000D+UserManual Release3.6.00 15‐3
PortFunctionality Chapter15
IngressDirection
Table15‐1:Portsettings‐Ingressdirection
Transparent
Theport‘doesnothing’withregardtoVLANs‐inboundframesareleft
untouched.
Tag
FramesenteringtheRT‐B(HSU)portwithoutVLANorQinQtaggingare
taggedwithVLANIDandPriority
a
,whicharepreconfiguredbytheuser.
Frameswhicharealreadytaggedatingressarenotmodifiedandpass
through.
a. Priority Code Point (PCP) which refers to the IEEE 802.1p priority. It indicates the frame priority level
from 0 (lowest) to 7 (highest), which can be used to prioritize different classes of traffic (voice, video,
data, etc).
Providertag
FramesenteringtheRT‐B(HSU)portaretaggedwithprovider’sVLANIDand
Prioritywhicharepreconfiguredbytheuser.Frame.swhicharealready
taggedwithProvidertaggingattheingressarenotmodifiedandpassed
through
.