Recognition Systems HandKey II - Page 101

HandKey II Installation and Operation Manual
Revision 2.0 Page 101
22. Press to skip to Step 24, the Aux In 1 option.
– or –
23. Press to assign Duress to the output. The display shows the Duress
assignment.
24. Press to step to the Aux In 1 option.
25. The Aux In 1 option appears on the display.
26. Press to skip to Step 29, the Aux In 2 option.
– or –
27. Press to assign Aux In 1 to the output. The display shows the Aux In 1
assignment.
28. Press to step to the Aux In 2 option.
29. The Aux In 2 option appears on the display.
DURESS
NO
ENTER
#
DURESS
YES
ENTER
AUX IN 1
NO
ENTER
#
AUX IN 1
YES
ENTER
AUX IN 2
NO