Recognition Systems HandKey II - Page 100

HandKey II Installation and Operation Manual
Page 100 Revision 2.0
12. Press to step to the TZ Violation option.
13. The TZ Violation option appears on the display.
14. Press to skip to Step 17, the ID Refused option.
– or –
15. Press to assign TZ Violation to the output. The display shows the TZ Violation
assignment.
16. Press to step to the ID Refused option.
17. The ID Refused option appears on the display.
18. Press to skip to Step 21, the Duress option.
– or –
19. Press to assign ID Refused to the output. The display shows the ID Refused
assignment.
20. Press to step to the Duress option.
21. The Duress option appears on the display.
TAMPER
YES
ENTER
TZ VIOLATION
NO
ENTER
#
TZ VIOLATION
YES
ENTER
ID REFUSED
NO
ENTER
#
ID REFUSED
YES
ENTER