Recognition Systems HandKey II - Page 103

HandKey II Installation and Operation Manual
Revision 2.0 Page 103
40. Press to step to the F1 Key option.
41. The F1 Key option appears on the display.
42. Press to skip to Step 45, the F2 Key option.
– or –
43. Press to assign F1 Key to the output. The display shows the F1 Key
assignment.
44. Press to step to the F2 Key option.
45. The F2 Key option appears on the display.
46. Press to skip to Step 49, the On Batt Backup option.
– or –
47. Press to assign F2 Key to the output. The display shows the F2 Key
assignment.
TRY AGAIN
YES
ENTER
F1 KEY
NO
ENTER
#
F1 KEY
YES
ENTER
F2 KEY
NO
ENTER
#
F2 KEY
YES