Recognition Systems HandKey II - Page 104

HandKey II Installation and Operation Manual
Page 104 Revision 2.0
48. Press to step to the On Batt Backup option.
49. The On Batt Backup option appears on the display.
50. Press to skip to Step 53, the Unlock option.
– or –
51. Press to assign On Batt Backup to the output. The display shows the On Batt
Backup assignment.
52. Press to step to the Unlock option.
53. The Unlock option appears on the display.
54. Press to skip to Step 57, the Aux Kpd option.
– or –
55. Press to assign on Unlock to the output. The display shows the Unlock
assignment.
56. Press to step to the Aux Kpd option.
57. The Aux Kpd option appears on the display.
ENTER
ON BATT BACKUP
NO
ENTER
#
ON BATT BACKUP
YES
ENTER
UNLOCK
NO
ENTER
#
UNLOCK
YES
ENTER