Redline RDL-3000 - Page 78

RDL-3000 User Manual
70-00158-01-DRAFT Proprietary Redline Communications © 2010 Page 78 of 142 November 25, 2010
When adaptive modulation is enabled, automatic adjustments to the modulation/coding
will result in relative changes to the PIR of that wireless link. Incorrect PIR settings may
result in excessive latency or dropped packets (buffer full condition).
DL Burst Rate: Downlink burst rate for unicast traffic. The RDL-3000 will establish a
wireless link only at the specified rate. The communicating wireless unit must also be
operating at the same fixed rate.
UL Burst Rate: Uplink burst rate for unicast traffic. The RDL-3000 will establish a
wireless link only at the specified rate. The communicating wireless unit must also be
operating at the same fixed rate.
Controls
Apply: Click to accept and activate displayed settings.