SERVICE PROGRAM MODE 19 January, 2001
5-32
SP5 Mode Number Function and [Setting]
5508* 2* Continuous Jam
Occurrence
Switches the control call on/off for the occurrence
of consecutive jams. DFU
0: Off, 1: On
If you select “1”, the alarm will sound if 5
consecutive jams occur in the copier.
3* Continuous Door Open
Switches the control call on/off for the cover open
alarm. DFU
0: Off, 1: On
If you select “1”, the alarm will sound if the door
remains open for 15 minutes.
5801* Memory Clear Resets all correction data for process control and
all software counters, and returns all modes and
adjustments to their default values. (☛ 5.1.8)
To execute, hold down
!
for over 3 seconds,
and then turn the copier off and on again.
Use this SP only after replacing the NVRAM, or
after the copier has malfunctioned due to a
damaged NVRAM.
5802* Printer Free Run Performs a free run. The scanner scans once and
the printer prints for the number of copies
requested.
To perform the free run, after selecting “1”, press
the Copy Window to enter copy mode, input the
number of copies, and then press the Start key.
To stop the free run, press ".
0: Off, 1: On
5803 Input Check Displays the signals received from sensors and
switches. (☛ 5.1.4)
5804 Output Check
Turns on the electrical components individually
for test purposes. (☛ 5.1.5)
5807 Option Connection Check
1 ARDF
2 Bank (Paper Tray Unit)
3LCT
4 Finisher (1000-sheet,
Two-Tray finisher)
Checks the connectors to the optional peripheral
devices. Execution will return either a “1” or “0”:
0: Device not connected correctly.
1: Device connected correctly.
5811* 1* Machine Serial Number Use to input the machine serial number. This is
normally done at the factory.
If you want to know the serial number, print the
system parameter list. Press
!
and then input
“A”.
5812* Service Tel. No. Setting
1* Service Tel. Number Use this to input the telephone number of the
service representative. This number is displayed
when a service call condition occurs.
Press the
!
key to input a pause. Press the
“Clear modes” key to delete the telephone
number.
To Next Page
Loading...
