5845
Delivery Srv Delivery Server
These are delivery server settings.
003
Retry Interval
Sets the time interval before the machine tries again when it goes back to standby after an error
occurs during an image transfer with the SMTP server.
[60~900/1]
004
No. of Retries
Sets the number of times the machine tries again before it returns to standby after an error occurs
during an image transfer with the delivery or SMTP server.
[0~99/1]
5846 UCS Setting
046
Init All Set&Dir Initialize Address Book Seting and Directories
The SP clears all the setting information managed in UCS and address book information (local,
delivery, LDAP) and restores these settings to their default values. Use this SP to initial the account
information (user codes and passwords) for system managers and users as well.
Note:
• Be sure to cycle the machine off and on after you execute this SP code.
• Once this SP has been executed, a message on the screens of applications that use the
address book will prompt users that the address book is being updated. This prevents the
machine from issuing SC870.
• The machine initializes to determine if the address book is stored on the HDD or on an SD
card. In order for the machine to determine whether to recognize an address book on the
HDD or the SD card, the machine must be cycled off and on once more to determine
whether the machine should recognize the address book on the HDD or the SD card.
047
Init Local AddrB Initialize Local Address Book
Clears all of the address information from the local address book of a machine managed with
UCS.
050
Init All Dir Initialize All Address Book Directories
Clears everything (including users codes) in the directory information managed by UCS. How-
ever, the accounts and passwords of the system administrators are not deleted.
060
Search Option
Service Program Mode Tables
227
To Next Page
Loading...
