852x 4 Booklet
852x 5 Z-Fold
852x 6 Punch
852x 7 Other
• If stapling is selected for finishing and the stack is too large for stapling, the unstapled pages are still
counted.
• The counts for staple finishing are based on output to the staple tray, so jam recoveries are counted.
8531 Staples
This SP counts the number of staples used by the machine.
[0~9999999/ 0 / 1]
8581
T:Counter [0~9999999/ 0 / 1]
These SPs count the total output broken down by color output, regardless of the application
used. In addition to being displayed in the SMC Report, these counters are also displayed
8591
O:Counter [0~9999999/ 0 / 1]
These SPs count the totals for A3/DLT paper used, number of duplex pages printed, and
the number of staples used. These totals are for Other (O:) applications only.
001 A3/DLT
-
002 Duplex
8601
Coverage Counter
These counts correspond to the total counts recorded with the mechanical counter.
001 Cvg: BW % Coverage: BW Pages
011 Cvg: BW Pages Coverage: BW Percent
8771
Dev Counter [0~9999999/ 0 / 1]
This SP counts the number of development roller rotations for development.
frequency of use (number of rotations of the development rollers) for black.
5. Service Tables
256
To Next Page
Loading...
