Ricoh A-P4 - SMC Report

No. Item What It Initializes
011 NCS
Network Control Service. IP addresses, SmartNetMonitor for
Admin., Web Status Monitor settings, TELNET settings
014 DCS Setting DCS (Delivery Control Service) settings
015 Clean UCS Settings User Information Control Service) settings
016 MIRS Settings Machine Information Report Service settings
017 CCS Certification and Charge-control Service settings.
018 SRM System Resource Management settings
019 LCS Log Count Service settings
7. After clearing all settings, make sure that you do the following:
• Do the laser beam pitch adjustment (SP2109). See Section 3 "Laser Beam Pitch Adjustment".
• Referring to the SMC Report, re-enter any values, which had been changed from their factory
settings.
• Execute SP3001-2 (ID Sensor Initial Setting).
Memory Clear: SP5801
275
5