Message Reason and Action
The required entry field is blank. Required settings have not been specified. Enter an
appropriate value in the field.
IPv4 address has not been set.
The IPv6 address has not been set.
The primary DNS server or the secondary DNS server have
not been specified. Specify the address.
Contains characters that cannot be
used.
The entry contains invalid characters. Check and make the
entry again.
The product key is invalid. The entered product key is incorrect. Check and make the
entry again. If the problem persists even if you enter the
correct product key, contact your service representative.
Invalid Email Address You cannot use this address. Check and make the entry
again.
Cannot retrieve the resource
information.
Contact your service representative.
The number of characters for the
password is incorrect.
It is possible to change the minimum number of characters,
but specify it to 8 or more characters for use in a CC-certified
environment.
The number of characters for the
password is incorrect.
The maximum number of characters for the password is 128.
Failed to save the settings. Contact your service representative.
Security setting is failed.
(Error code)
An attempt to change the setting has failed in some device(s).
If an error code appears, report the error code to your
service representative.
Failed to change the setting on some
devices.
An attempt to change the setting has failed in some device(s).
If an error code appears, report the error code to your
service representative.
Some devices are not supported. An attempt to change the setting has failed in some device(s).
If an error code appears, report the error code to your
service representative.
Perform the process again later. Processing is taking some time. Please check the Device List
after some time has passed.
8. Appendix
108
To Next Page
Loading...
