Settings on Installation
Initial system settings appear when you first log in to the machine.
You can configure the following settings:
Date/Time Settings
Specify the time zone, date settings, and time settings.
For details, see page 67 "Date/Time Settings".
After configuration, click (Save).
Networking
Specify the networking.
For details, see page 68 "Networking".
After configuration, click (Save).
IEEE 802.1x Authentication Setting
Specify the IEEE 802.1x authentication settings.
For details, see page 70 "IEEE 802.1x Authentication Setting".
After configuration, click (Save).
• By clicking (Save) in the [IEEE 802.1x Authentication Setting] menu, you can specify [Proxy
Server Setting] and [Connect to @Remote System].
Proxy Server Setting
Specify the proxy server setting.
For details, see page 74 "Networking".
Connect to @Remote System
Specify the connection settings.
For details, see page 87 "Connect to @Remote System".
2. Setting up the RC Gate
24
To Next Page
Loading...