Ricoh A2 - Format of a Discovery Range CSV File

Line
number
Contents
5 "(Value of the device that corresponds to the item name of the column)"
As "Item name of the column" in line 4, the item name of the column displayed in the header of the
device list is written out row-by-row sequentially from the left-hand side.
In Line 5 and subsequent lines, the values of all devices displayed in the device list at the time of export
can be written line-by-line along with the values in the columns not displayed on the machine’s control
panel.
Format of a Discovery Range CSV File
CSV files are divided into two types depending on the search method of discovery range.
Broadcast
The broadcast CSV file can be read and written in the following settings:
• [Broadcast] in [Add Device] in [Discovery & Polling].
• [Broadcast] in [Auto Discovery] in [@Remote Settings] in [@Remote].
The variables are indicated in bold letters.
Line
number
Contents
1 # Format Version: 6.1.1.X
2 # Generated at: (Date/time of write-out)
3 # Function Name: Broadcast Discovery Range
4 "(Row name)"
5 "(Value that corresponds to row name)"
The "Row name" and row number in line four, and their corresponding values of line five and
subsequent lines are as follows:
Row
number
Row name Value of line five and subsequent lines
A Subnet Enter a subnet address. An IPv4 address can be used.
3. How to Configure and Check the Device
36