You cannot check the overlaps of the discovery range before clicking the button and the
discovery range added by clicking the button.
The items that can be specified vary depending on whether [Network Search] or [Broadcast] is
specified. Click (Export data to a CSV file) to export the set search range as a CSV file.
3. After filling all the fields, click (Save), and then click (Immediately perform).
Retrieve data to identify the device.
4. Check the device in [Discovered Managed Devices], and then click [OK].
Registering a Device to the RS Center System
This section explains how to register a device to the RS Center System.
When registering a device, be sure to add it to the [Discovered Devices] tab function in advance. For
details about add device, page 62 "Search the Device".
1. In the section area, click [Discovery & Polling].
2. Click [Discovered Devices] in [Add Device] in the section tree.
If the added device does not appear in the list area, click (Refresh). Repeat this process in
accordance with the procedure described on page 62 "Search the Device" until the added device
appears in the list area.
3. When the device information appears, right-click on the device you want to register in
[Display Name] in the list area, and then click [Register].
You can also register by clicking the (@Remote) icon in the list area.
4. Check that the device to be registered appears in the [Confirmed View], and then click
[OK].
If registering a device to the RS Center System fails, "Failed" appears in the [Result] field with the
cause of failure displayed in the [Cause] field. Take appropriate measures according to the cause
of the failure displayed in the [Cause] field.
5. In the [Registration Result], click [OK].
6. To display the registered device, click the (Refresh) in the device list.
If the group tree has not been updated, right-click in the section area and update the list.
5. Discovery and Polling
64
To Next Page
Loading...
