Overwriting an Access Account
How to change and overwrite an access account of a detected device is explained below.
1. In the section area, click [Discovery & Polling].
2. In the [Access Profiles] category on the section tree, click the target account.
3. Select the profile name of the account that you want to change from the list area.
4. Click (Save) when the setting is complete.
5. Click [OK].
Deleting an Access Account
1. In the section area, click [Discovery & Polling].
2. In the [Access Profiles] category on the section tree, click the target account.
3. Select the profile name of the account that you want to delete from the list area.
4. Click (Delete).
5. Click [Yes] when a confirmation message appears.
6. Click [OK].
• The account may not be deleted depending on its state. For details, see page 106
"Troubleshooting".
5. Discovery and Polling
60
To Next Page
Loading...
