About the RC Gate Monitor
The RC Gate Monitor is the software used to register, monitor, and make settings of the RC Gate. The
software is pre-installed in the RC Gate.
Access the RC Gate Monitor in this equipment from web browser in the computer. The computer and this
equipment must be on the network.
• Some failure in operation or in displaying might occur in the following cases:
• You use web browsers lower than the recommended version.
• JavaScript is not set to valid.
• Cookie is not set to valid.
• You set to show cache in the web browser.
• Page layout may be out of shape depending on the font size settings. We recommend to set it to
"Medium" or smaller.
• Some letter deterioration may occur if you use languages that do not correspond to web browser.
• Specify settings so that the machine and main unit, and browser and main unit can be used in a
shared-usage mode.
• Depending on the browser being used, a dialog box asking whether you cancel the execution of
the script may appear. If this happens, select [No].
Applicable Operating System
Use operating systems which support the recommended web browsers below.
Recommended Web Browser
• Microsoft Internet Explorer 8.0 or later
• Mozilla Firefox 28.0 or later
• Check whether the certificate required for SSL encrypted communication has been installed on the
RC Gate.
Users of the RC Gate Monitor
The following type of users can log in to the RC Gate:
Administrator
The administrator can change the RC Gate settings, provide access permission to the customer
engineer.
About the RC Gate Monitor
17
To Next Page
Loading...
Need help?
General
