Specifications
65
6
Important
❒ In Windows 2000, the IEEE 1394 Interface Unit can only be used with Service
Pack 1 or later. If the Service Pack is not installed, the connectable number of
devices in a 1394 bus is only one, and the client cannot access the IEEE 1394
Interface Unit without using an account that has Administrators permission.
❒ The optional IEEE 1394 Interface Unit is not supported by Windows
95/98/Me. If the “plug and play” function starts, click [Cancel] in the [New
Hardware Found] or [Device Driver Wizard] dialog box.
❒ Do not plug or unplug the 1394 interface cable while installing the printer
driver.
❒ Do not turn off or on the device while installing the printer driver.
❒ If the IEEE 1394 Interface Unit is installed, uninstall the printer driver after the
IEEE 1394 interface cable is unplugged.
Note
❒ The IEEE 1394 Interface Unit could not receive data from more than one com-
puter at the same rime. In this case, an error message appears. The machine
can accept data sent from other computers after the first print job has finished.
❒ Bidirectional transmissions are not supported by the IEEE 1394 Interface
Unit.
❒ When the IEEE 1394 Interface Unit is installed successfully and the IEEE 1394
interface cable plug is connceted, the machine icon automatically changes
from “Use Printer Offline” to “Ready”.
PostScript 3 Unit Type 1027
Reference
See the Postscript 3 Unit Type 1027 Operating Instructions Supplement for in-
formation.
To Next Page
Loading...
