Technical Bulletin PAGE: 3/9
Model: Taurus-C1/P1 (D074/D075/M044) Date: 15-Feb-12 No.: RD074045
4. Connect the debug cables to the BCU board.
-There are two connectors on the BCU board: one for the Master connector and one for
the Slave connector.
-If required, rotate the IOB/BCU Board to identify the location of the Master and the Slave
connectors on the BCU board by referring to the FSM section “4. Replacement and
Adjustment > Main Boards, HDD units > IOB, BCU”.
IOB/BCU Board
Master
Connector
Slave
Connector
To Next Page
Loading...
