Technical Bulletin PAGE: 4/16
Model: Taurus-C1/P1 (D074/D075/M044) Date: 10-Apr-12 No.: RD074060
6. Make another 5 copies, this time in duplex.
7. Measure the locations (c) and (d) on the back side and calculate the skew amount “(c)
– (d)” to check if skew is within the recommended range +/- 0.4mm.
8. Finalize the adjustment so that skew is within +/-0.5mm for both sides. If the skew
amount varies among the 5 copies, make additional adjustments in SP1004
(Registration Buckle Adj) and SP1005 (Reg Buckle Adj; Thick). The skew amount will
basically reduce by increasing the SP value, although the effect is dependent on paper
thickness.
This completes the procedure for achieving the recommended skew range.
To Next Page
Loading...
