Preparing to Print (Computer Side)
34
Basic Operation
10
When the [Printer name entry] screen appears, click [Next].
You can also change the printer name. Enter the name in the [Printer name].
11
When the [Ready to install] screen appears, click [Install].
Installation starts.
12
Click [Print Test Page], and then click [Close].
Set printing paper in the machine beforehand.
13
Ensure that the <Clear Job> key indicator is on, and then press the <Start>
key.
14
Check that the test print was properly printed, and then click [OK].
If the master is not made properly, see p.133 "Troubleshooting Tips".
Also when the following screen appears, continue the installation.
• For Windows Vista/Windows 7/Windows 8/Windows 8.1:
[Windows Security] screen
• For Windows XP:
[Windows logo testing] screen
NOTE
To Next Page
Loading...