Preparing to Print (Computer Side)
40
Basic Operation
30
Open the printer folder.
Open the [Apps] screen, and then click [Control Panel]-[Hardware and Sound]-[Devices and Printers].
31
Open the [Properties] dialog box of the installed printer.
Right-click on the corresponding printer icon in the printer folder, and then select [Printer properties] in the
displayed menu.
32
Click [Print Test Page], and then click [Close].
Set printing paper in the machine beforehand.
33
Check that the test print was properly printed, and then click [Close].
34
Remove the [RISO Printer Driver] CD-ROM from the CD-ROM drive of the
computer.
Printer Driver installation is now complete.
Keep the removed CD-ROM at hand.
IMPORTANT!
To Next Page
Loading...