Printing Data
50
Basic Operation
6
Set the print conditions.
Specify the number of copies to be printed and the area to be printed.
Never fail to deselect the [Collate] box.
(If it is selected, the master-making operation will be repeated for every copy.)
7
Click [Properties].
If you want to set additional print conditions for the current print job, click [Properties] to open the [Properties]
dialog box.p.56 "Functions to be Set Up with the Printer Driver (Computer Side/Driver Side)"
8
Click [OK] to start printing.
(1) When the setting is complete, click [OK] to close the [Properties] dialog box.
(2) Return to the [Print] screen, and then click [Print] (or [OK]).
(3) The original data will be transmitted from the computer to the machine.
The following procedures assume that [Auto-process] is [OFF] (initial setting) and [Auto switch to master-making]
is [OFF] (initial setting).
• If you want to print a file consisting of several pages, and the file includes different paper sizes or page directions,
printing may fail when you choose [All] for the paper range. Specify the page numbers for printing pages of the same
size or direction in [Pages].
• When several original data is received, the machine processes the data in the order of reception.
• When original data is transmitted from several computers connected on a network, the order of reception cannot be
confirmed. Transmit the original data after confirming that the machine is available.
IMPORTANT!
Processing may take longer depending on the performance of your computer (such as CPU, computer memory, etc.).
NOTE
To Next Page
Loading...