Customizing Initial Settings [Custom Setting Mode]
95
Advanced Features (Printer Machine Side)
53 Master Quantity Display
The total number of masters generated with the machine is
displayed.
This number is displayed by two switching screens; a 3-digit
number preceded by an under bar and a 4-digit number.
Example: For 1,234,567 masters,
_1234567
Execute steps 1 through 3 in “Operation Procedure”. p.96
"Operation Procedure"
The total number of generated masters is shown on the Master
Quantity display.
54 Total Print Drum Print Quantity Display
The number of copies printed with the current Print Drum on the
machine is displayed.
This number is displayed by two switching screens; a 3-digit
number preceded by an under bar and a 4-digit number.
Example: For 1,234,567 copies,
_1234567_1234567
Execute steps 1 through 3 in “Operation Procedure”. p.96
"Operation Procedure"
The total number of copies printed with the Print Drum is shown
on the [Print Drum Print Quantity] Display.
70 Base IP Address Setting
Set an IP address for the machine.
p.102 "Machine IP Address Setting"
73 Initialize the Network
Initialize the network setting and return to the factory setting when
the RISO Network Card (option) is installed.
See the User's Guide of "RISO Network Card" for details.
99 Initial Setting Restoration
Resets all [Custom Setting] mode settings to the initial settings
(factory default).
p.96 "Operation Procedure"
Item
No.
Changeable Items
Parameter Selection
0 1 2 3 4 5
To Next Page
Loading...