R&S
®
ZVA/ZVB/ZVT CALCulate
1145.1084.12 6.53 E-6
CALCulate<Ch/Tr>:DLINe:STATe <Boolean>
Switches the horizontal line on or off.
<Ch/Tr>
Channel number used to identify the active trace.
<Boolean>
ON | OFF - Horizontal line on or off.
*RST value OFF
SCPI, Command Types
Device-specific, command or query.
Example:
See CALC:DLIN.
CALCulate<Ch/Tr>:FILTer[:GATE]...
This subsystem defines the properties of the time gate optimize the time domain response (with option
ZVAB-K2, Time Domain).
CALCulate<Ch/Tr>:FILTer[:GATE]:TIME:CENTer <numeric_value>
Defines the center time of the time gate.
<Ch/Tr>
Channel number used to identify the active trace
<numeric_value>
Center time of the time gate
Range [def. unit] -99.8999999 s to +99.8999999 s. The increment (parameters
UP or DOWN) is 0.1 ns. [s]
*RST value 1.5E-009 s
SCPI, Command
Types
Confirmed, command or query
Example:
*RST; CALC:TRAN:TIME:STAT ON;
CALC:FILT:TIME:STAT ON
Reset the instrument and enable the time domain
representation and the time gate.
CALC:FILT:TIME:CENT 0; SPAN 5ns
Set the center time to 0 ns and the time span to 5 ns.
To Next Page
Loading...
