Rohde & Schwarz Scope Rider RTH1004 - Page 365

Remote Control Commands
R&S
®
Scope Rider RTH
365User Manual 1326.1578.02 ─ 12
Return values:
<Level> Range: -260 to 260
Increment: 1
*RST: 0
Default unit: dB
Usage: Query only
SPECtrum:MARKer:RESult<m>:LEVel:DELTa?
Queries the level difference between the reference marker and the specified marker.
Suffix:
<m>
.
1 to 15
Marker; maximum depends on active markers and detected
peaks (see SPECtrum:MARKer:COUNt and SPECtrum:
MARKer:RCOunt?
Return values:
<LevelDelta> Range: -520 to 520
Increment: 1
*RST: 0
Default unit: dB
Usage: Query only
SPECtrum:MARKer:RMARker:FREQuency?
Queries the frequency of the reference marker. The reference marker is the one with
the highest level.
Return values:
<Frequency> Range: -10E+9 to 10E+9
Increment: 10
*RST: 10E+6
Default unit: Hz
Usage: Query only
SPECtrum:MARKer:RMARker:VALue?
Queries the measured level at the reference marker.
Return values:
<Level> Range: -260 to 260
Increment: 1
*RST: 0
Default unit: dB
Usage: Query only
Spectrum Analysis