Rohde & Schwarz SMB 100a - Page 282

Command Description R&S SMB
1407.0806.32 6.90 E-2
SYSTem:COMMunicate:NETWork:COMMon:SET
The command activates the hostname setting (Command SYST:COMM:NETW:COMM:HOST).
The command triggers an event and therefore has no *RST value and no query form.
Example:
SYST:COMM:NETW:COMM:SET
'activates a change of the hostname.
*RST value Resolution Options SCPI
- - Device-specific
SYSTem:COMMunicate:NETWork:DNS:ALTernate 0.0.0.0 .. ff.ff.ff.ff
The command sets the alternate DNS server address manually.
Example:
SYST:COMM:NETW:DNS:MODE STAT
' the DNS server address is assigned manually.
SYST:COMM:NETW:DNS:ALT 7.8.9.10
'sets the IP address of the alternate DNS server
SYST:COMM:NETW:COMM:SET ON
'activates the above settings.
*RST value Resolution Options SCPI
- - Device-specific
SYSTem:COMMunicate:NETWork:DNS:MODE STATic | AUTO
The command selects if the DNS server address is assigned automatically or manually. The entry is
only activated after sending command SYST:COMM:NETW:DNS:SET.
Parameters: AUTO
The DNS server address is assigned automatically. The network used must
support automatic assignment of address (DHCP) in order to use this function.
STATic
The DNS server address is assigned manually.
Example:
SYST:COMM:NETW:DNS:MODE AUTO
' the DNS server address is assigned automatically (DHCP).
SYST:COMM:NETW:COMM:SET ON
'activates DHCP.
*RST value Resolution Options SCPI
AUTO - Device-specific