225
Recording MIDI
Overview Sound 1 Sound 2 Sound 3 Pad Sampler
Menu/System
AppendixSequencer
Realtime Erase is a function that erases unwanted data during
realtime recording. This is particularly convenient during loop
recording, since it lets you erase data without stopping recording.
Realtime Erase can be executed only if the Recording Mode is
set to “MIX.”
1.
Begin realtime recording (p. 222).
The Realtime Recording window appears.
2.
Press [F6 (Erase)].
The Realtime Erase window appears.
3.
Erase unwanted data.
To erase all data, press [F7 (Erase All)]. Data will be erased for
as long as you hold down the button.
To erase notes of a specific key, hold down that key. Data for
that note will be erased for as long as you hold down that key.
To erase notes of a specific key range, hold down the top and
bottom keys of that range. Data for that range will be erased for
as long as you hold down those keys.
4.
Press [F8 (Close)] to close the Realtime Erase window.
You will return to the normal recording state.
The Rehearsal function lets you temporarily suspend recording
during realtime recording. This is convenient when you want to
practice the phrase that you will record next.
1.
Begin realtime recording (p. 222).
The Realtime Recording window appears.
2.
Press [F7 (Rehearsal)] or [REC].
The [REC] indicator will blink, indicating that you are in
rehearsal mode. In this state, nothing will be recorded when
you play the keyboard.
3.
To return to record mode, press [F7 (Rehearsal)] or [REC]
once again.
Erasing Unwanted Data While You
Record (Realtime Erase)
Auditioning Sounds or Phrases While
Recording (Rehearsal Function)
Fantom-G_r_e.book 225 ページ ２００９年７月２日 木曜日 午後２時５５分
To Next Page
Loading...
Need help?
General
