280
Menu Reference
The menus contain various functions you will find helpful when
using the Fantom-G.
Press [MENU] to access the menu, select the desired function, and
execute it.
Here’s how to load a project from internal memory or USB memory
into the Fantom-G’s temporary area, or save the project from the
Fantom-G’s temporary area.
This operation will load a project from internal memory or USB
memory into the Fantom-G’s temporary area.
When you load a project, the contents of the temporary area will
be rewritten. If the temporary area contains important data, you
must save it to internal memory or USB memory before loading
a project.
1.
Press [MENU] to access the Menu window.
2.
Turn the VALUE dial or use [CURSOR] to choose “Project,”
and then press [ENTER].
The Project Menu will appear.
3.
Turn the VALUE dial or use [CURSOR] to choose “Load
Project,” and then press [F8 (Select)].
You can also press [F1 (Load)] to execute this.
4.
Press [F1 (Internal)] or [F2 (USB Memory)] to select the
load-source area (internal memory or USB memory).
5.
Use
or to select the project that you want to load.
6.
Press [F8 (Load)].
A confirmation message will appear.
7.
Press [F7 (OK)] to execute.
* If you decide to cancel, press [F8 (EXIT)].
Menus
Menu name
Explanation Page
Project
Load or save a project p. 280
System Access the System Setting screen p. 290
Factory Reset Reset the Fantom-G to the factory-set con-
dition
p. 284
Format USB
Memory
Formats (initializes) USB memory p. 284
USB Storage Connects the Fantom-G to a computer and
mounts the internal memory as USB mem-
ory
p. 285
Import Audio Imports a WAV/AIFF format audio file
into the Fantom-G
p. 289
Project-related Settings
(Project)
Load Project
Fantom-G_r_e.book 280 ページ ２００９年７月２日 木曜日 午後２時５５分
To Next Page
Loading...
Need help?
General
