283
Menu Reference
Overview Sound 1 Sound 2 Sound 3 Pad Sampler
Menu/System
AppendixSequencer
By executing this operation, a project previously backed up to USB
memory using Backup Project can be restored into internal memory.
Restoring a backup will overwrite the internal memory. If
internal memory contains important data, save it to USB
memory before you execute the Restore Project operation.
1.
Press [MENU] to access the Menu window.
2.
Turn the VALUE dial or use [CURSOR] to choose “Project,”
and then press [ENTER].
The Project Menu will appear.
3.
Turn the VALUE dial or use [CURSOR] to choose “Restore
Project,” and then press [F8 (Select)].
You can also press [F6 (Restore)] to execute this.
A confirmation message will appear.
4.
Press [F7 (OK)] to execute.
* If you decide to cancel, press [F8 (EXIT)].
“System Settings (Settings Common to All Modes)”
(p. 290)
Restore Project
System Settings (System)
Fantom-G_r_e.book 283 ページ ２００９年７月２日 木曜日 午後２時５５分
To Next Page
Loading...
Need help?
General
