64
Playing in Live Mode
In general, the Layer Edit screen operates in the same way as the
Live Play (Layer/Split) screen, but you can use the F3–F6 keys to
instantly switch between the displayed part groups.
Here’s how to access the Layer Edit screen.
1.
Press [LIVE].
You will enter Live Mode, and the Live Play (Layer/Split)
Screen appears.
fig.04-015_50
2.
Press [F8 (Layer Edit)].
The Layer Edit screen will appear.
If you don’t like the patch that is assigned to a part, it’s easy to
switch the patch.
1.
Select the part whose sound you want to switch.
2.
Press [F1 (Patch List)].
The Patch List screen will appear.
fig.05-008_50
For details on using the Patch List screen, refer to
“Selecting
Patches from the List”
(p. 49).
In the Layer Edit screen you can set the following parameters for
each part.
1.
Press [LIVE], and then press [F8 (Layer Edit)] to access the
Layer Edit screen.
2.
Use [CURSOR] to move the cursor to the parameter you
want to edit.
3.
Turn the VALUE dial or use [INC] [DEC] to set the desired
value.
Using the Layer Edit Screen
F-key
Explanation
F3 Internal
Internal (internal sound generator)
F4 EXP 1 Expansion board 1
F5 EXP 2 Expansion board 2
F6 External External MIDI output
Selecting the Sound for a Part
Editing the Part Settings
Parameter
Shown in the
screen as
Keyboard Switch (p. 135)
KBD
Patch Type (p. 134) Type
Patch Bank (p. 134) Bank
Patch Number (p. 134) Patch Name
Keyboard Range Lower (p. 135) Lower
Keyboard Range Upper (p. 135) Upper
Arpeggio Part (p. 146) ARP
Sample Pad Part / Rhythm Pad Part (p. 146) SAM/RHY
Fantom-G_r_e.book 64 ページ ２００９年７月２日 木曜日 午後２時５５分
To Next Page
Loading...
Need help?
General
