76
Modifying the Sound in Real Time
Knob 1–4 Settings
1.
Hold down [SHIFT] and rotate one of the knobs.
The Knob screen appears.
2.
Move the cursor to the parameter that you want to set, and
turn the VALUE dial or press [INC] [DEC] to set it.
3.
If you want to save your settings, press [F7 (Sys Write)].
Press [Exit] to return to the previous screen.
Realtime controller settings are saved independently for each
live set as part of the live settings. This lets you create live sets
that make effective use of controller settings. Similarly in studio
mode, this setting is saved as part of the studio set.
Knob 1–4 Assign
Specify the functions that will be controlled by the knobs.
Value
OFF:
Off
CC01–31, CC32(OFF), 33–95:
Control Change
AFTERTOUCH:
Aftertouch
PITCH BEND:
Pitch Bend
ARPEGGIO ACCENT:
Arpeggio accent rate
ARPEGGIO SHUFFLE:
Arpeggio shuffle rate
ARPEGGIO OCT UP:
The range in which the arpeggio is
sounded will rise in steps of an octave.
ARPEGGIO OCT DOWN:
The range in which the arpeggio is
sounded will lower in steps of an octave.
MASTER LEVEL:
Master Level (p. 297)
DIGITAL/USB INPUT LEVEL:
Digital/USB Input Level (p. 258)
* If the system setting
“Knob Assign Source”
(p. 293) is set to
“System,” the system settings will be used. If it is set to “TEMP,” the
settings of the live set or studio set will be used.
Slider 1–8 Settings
1.
Hold down [SHIFT] and move one of the sliders.
The Slider screen appears.
2.
Move the cursor to the parameter that you want to set, and
turn the VALUE dial or press [INC] [DEC] to set it.
3.
If you want to save your settings, press [F7 (Sys Write)].
Press [Exit] to return to the previous screen.
Realtime controller settings are saved independently for each
live set as part of the live settings. This lets you create live sets
that make effective use of controller settings. Similarly in studio
mode, this setting is saved as part of the studio set.
Slider 1–8 Assign
Specify the functions that will be controlled by the sliders.
Value
OFF:
Off
CC01–31, CC32(OFF), 33–95:
Control Change
AFTERTOUCH:
Aftertouch
PITCH BEND:
Pitch Bend
ARPEGGIO ACCENT:
Arpeggio accent rate
ARPEGGIO SHUFFLE:
Arpeggio shuffle rate
ARPEGGIO OCT UP:
The range in which the arpeggio is
sounded will rise in steps of an octave.
ARPEGGIO OCT DOWN:
The range in which the arpeggio is
sounded will lower in steps of an octave.
* If the system setting
“Slider Assign Source”
(p. 293) is set to
“System,” the system settings will be used. If it is set to “TEMP,” the
settings of the live set or studio set will be used.
Changing Realtime Controller Settings
Fantom-G_r_e.book 76 ページ ２００９年７月２日 木曜日 午後２時５５分
To Next Page
Loading...
Need help?
General
