80
Playing Arpeggios
7.
Select the desired Import Destination. Turn the VALUE dial
to make your choice, and then press the [F8 (Write)] button.
A confirmation message will appear.
8.
Press [F7 (OK)] to execute.
The SMF or phrase will be imported into the arpeggio user
style.
Please note the following points regarding importing an
arpeggio.
• Only SMF Format 0 is supported. If the data is incorrect, the
screen will indicate
“Cannot Import SMF Format 1!”
or
“Illegal File!”
.
• Only the note data will be imported from the original data into
the arpeggio.
• Up to 500 events (with a note on/off counting as one event) can
be imported. If there are more than 500 events, the screen will
indicate
“Too Many Data!”
.
The Arpeggios you create are temporary; they are deleted as soon as
you turn off the power or select some other Arpeggio. You can store
128 arpeggios in the User memory.
1.
Confirm that the current Arpeggio is the one you want to
save.
2.
Press [F7 (Write)].
The Arpeggio name entry screen will appear (p. 42).
3.
When you have finished entering the name, press [F8 (OK)].
A screen in which you can select the destination for the write
will appear.
4.
Turn the VALUE dial or use [INC] [DEC] to select the write
destination.
5.
Press [F8 (Write)].
A message will ask you for confirmation.
6.
To write the data, press [F7 (OK)].
Never switch off the Fantom-G while data is being saved.
To cancel, press [F8 (EXIT)].
Saving the Arpeggio You
Have Created (Write)
Fantom-G_r_e.book 80 ページ ２００９年７月２日 木曜日 午後２時５５分
To Next Page
Loading...
Need help?
General
