Roland VersaEXPRESS RF-640 - Specifications

7
Main Specications
Printing Area
125
Maximum Printing Area When Using Crop Marks
The maximum printing area when crop marks are used is reduced from the maximum printing area by an
amount equal to the crop marks when crop marks are not used.
10 mm
12.5 mm
10 mm
12.5 mm
12.5 mm
10 mm
12.5 mm
10 mm
Crop mark
Maximum printing area
Printing area
The Media-Cutoff Location During Continuous Printing
When a media-cuto command is sent from the computer, the cuto location on the media is as shown in
the gure below.
75 mm
Margin
(set value on the
software RIP)
Location where
separated
Second page
First page