4
Part of
Practice
Accommodating to the Types and Condition of Media
88
Using Transparent Media
1.
Set the media type to "CLEAR."
Press .
Press several times until the screen on the left appears.
Press
twice.
Press to select “CLEAR.”
Press
to enable the setting.
2.
Make the setting for the media width.
Press , and then .
Press .
Use to enter the media width.
Press
to enable the setting.
Press to go back to the original screen.
3.
Load transparent media to the machine.
Refer to P. 21, "Loading Media" and load media on the machine.
4.
Make the setting for the location of the right edge of the media.
Press .
Press several times until the screen on the left appears.
Press
.
Press twice.
Press
.
The print-head carriage moves to the position now set and the screen on
the left appears.
To Next Page
Loading...
