6
FAQ
114
Other Problems
The Machine Doesn't Run
Is the cable connected?
Connect the cable securely.
"Setup Guide"
Is the power switched on?
Switch on the main power, then press the sub power switch and make sure the sub power switch lights up.
P. 20, "Switch On!"
Are the covers open?
Close Front Cover, Cover L and Cover R.
Is lit up?
Printing is not performed when is not lit. Lower the loading lever.
P. 42, "Getting Ready to Receive Data from a Computer"
Is the top menu displayed?
Top menu
If the top menu isn't displayed, printing doesn't start even when data is sent from the computer. To go to the
top menu, press
, then press .
P. 42, "Getting Ready to Receive Data from a Computer"
Is a message displayed on the screen?
P. 117, "A Message Appears"
P. 119, "An Error Message Appears"
Is lit up?
When lights up, operation is paused. To resume, press . goes dark and printing
resumes.
P. 44, "Pausing and Canceling Printing"
To Next Page
Loading...
