2
Basic
Operation
Printing
42
Getting Ready to Receive Data from a Computer
When P. 21, "Loading Media", P. 33, "Setup of Media" are completed, get ready to receive the data
from a computer.
CAUTION
Never touch the print-head carriage while print is in progress.
The print-head carriage moves at high speed. Contact may cause injury.
Procedure
Close the front cover.
Make sure stays steadily lit.
If the light does not come on, lower the loading lever.
Wait until stays steadily lit.
Make sure the top menu is displayed.
If the top menu is not displayed, press
several times.
Top
menu
Flashing
Steadily lit
Steadily
lit
Printing is not possible in these situations.
The machine does not run when the front cover is open.
Never open the front cover when printing is in progress. Doing so interrupts printing.
Data from the computer is not accepted when
is dark.
When "ON" is set to the print heater and/or the dryer, printing does not start until
lights up.
Data from the computer is not accepted when you are not at the top menu.
To Next Page
Loading...
