2
Basic
Operation
Printing
41
Press .
Press .
Press .
A test pattern is printed.
Dot drop-out
If no dot drop-out or no dot deection occurs, press to go back to the original
screen. If dot drop-out or dot deection occurs, go to procedure
3
.
3.
Perform a normal cleaning
Press .
Press .
Normal cleaning starts.
When it nishes, the screen on the left appears again.
Press to go back to the original screen.
Perform a printing test on procedure
2
. again to make sure the dot drop-out or dot
deection has been corrected.
If the problems persist, try performing cleaning a second time. If the machine has been used for a long
period, the problems may persist even after two or three-cycle cleaning. Then try cleaning using a dif-
ferent method.
P. 55, "When Normal Cleaning Is Not Effective"
To Next Page
Loading...
