2
Basic
Operation
Setup of Media
38
7.
Saving the setting as preset
Press to select [SAVE].
Press
to enable the setting.
If you select "NEXT", the screen of
appears and all settings you have
made are not saved as a preset. However, they remain as the current set-
tings in the machine.
Use to select [Destination to Save].
You can select one of NAME1 to 8.
Press to enable the setting.
Use to select characters.
Use
to move the next character.
Select the following characters in the same way.
You can enter up to 15 characters.
Press to enable the setting.
Press to go back to the original screen.
For the individual setting method of this setting item and the description, refer to P. 76, "Fully Utilizing
Preset Function"
This completes the operation of the [Media Setting] menu.
PRESET
[SAVE] NEXT
SAVE TO
NAME1
SE T NAME
COMPLETED
To Next Page
Loading...
