3
Maintenance
Maintenance that Should Be Performed Daily
52
When You Cannot Check Discharged Fluid Level in Drain Bottle
WARNING
Never place discharged uid and ink near open ame.
Doing so may cause re.
CAUTION
To store discharged uid temporarily, place it in the included drain bottle
or in a durable sealed container such as a metal can or polyethylene tank,
and cap tightly.
Any spillage or vapor leakage make cause re, odor, or physical distress.
Discard discharged uid properly, in accordance with the laws in effect in your locale.
Discharged uid is ammable and contains toxic ingredients. Never attempt to incinerate discharged uid or
discard it with ordinary trash. Also, do not discard it in sewer systems, rivers, or streams. Doing so may have
an adverse impact on the environment.
Splashed ink inside the drain bottle surface may not allow you to easily check the amount of dis-
charged uid in the drain bottle. If the inner surface is not visible, clean the drain bottle in the fol-
lowing way when discarding the discharged uid.
Clean the inside of the drain bottle using the included cleaning stick. (Cleaning sticks cannot
be reused.)
If the method described above does not work well, try the following method.
Procedure
Detach the drain bottle to be cleaned from the machine, and attach the other
drain bottle included as an accessory to the machine.
When discarding the discharged uid of the detached drain bottle, let the uid
remain in the drain bottle by 2 to 3 cm from the bottom.
Firmly tighten the cap of the drain bottle.
x
Lay down the drain bottle and roll it so that all the inner surface is wet with the
remaining discharged uid.
y
Place the drain bottle upright and leave it as it is for 1 to 2 hours.
z
If the splashes still remain, repeat steps
x
and
y
.
Discard the uid.
To Next Page
Loading...
