3
Maintenance
Replacing Consumable Parts
68
Attach the new wiper.
Place the inclined end on the back side. If the wiper is placed inversely, the proper cleaning becomes
impossible.
Place the inclined
end on the back side.
Attach the hook.
Make sure to attach the hook. Otherwise it causes
dot-drop out or else.
3.
Reattach the cover R, and nish the wiper replacement menu.
Attach the cover R.
Press .
After the process to nish the wiper replacement menu, the screen on the
left appears.
Press to go back to the original screen.
4.
Perform a printing test to verify the results of the procedure.
Perform a printing test to check the result.
P. 40, "Printing Tests and Cleaning"
To Next Page
Loading...
