3
Maintenance
Replacing Consumable Parts
73
2.
Replace the separating knife.
Remove the separating knife.
Loosen the screw until it slips out.
Grasp the screw portion, and slowly pull
it out in the direction of the arrow. When
doing this, do not pull it back toward you.
Install a new knife.
The knife is secured in place by the magnet.
Slowly insert it into the groove.
x
Tighten the screw.
Ensure that the knife does not slip out of position
at this time.
3.
Finish the separating knife replacement menu.
Close the front cover.
Press
.
Press to go back to the original screen.
①
②
②
Magnet
Positioning
groove
To Next Page
Loading...
