4
Part of
Practice
Fully Utilizing Preset Function
77
[PRINT] (Print heater), [DRYER] P. 79, "Making the Temperature Setting for
the Media Heating System"
[PREHEATING] P. 81, "Control of Media Heating System Dur-
ing Preheating"
[DRYING TIME] P. 82, "Setting the Drying Time After Printing"
[FEED FOR DRY] P. 82, "Drying the Trailing Edge of the Printing
Area on the Dryer"
[ADJUST BI-DIR SIMPLE SETTING] P. 84, "Correcting for Misalignment in Bidi-
rectional Printing"
[ADJUST BI-DIR DETAIL SETTING] P. 85, "Correcting for Misalignment in Bidirec-
tional Printing More Precisely"
[CALIBRATION] P. 85, "Alleviating Horizontal Bands and the
Like (Feed Correction Function)"
[SHEET TYPE], [SHEET WIDTH], [SHEET POS.] P. 88, "Using Transparent Media"
[SCAN INTERVAL] P. 90, "Printing Hard-to-Dry Media"
[VACUUM POWER] P. 90, "Using the Media Easy to Curl Up / Hard
to Be Fed"
[FULL WIDTH S] P. 91, "Speeding Up Printing for Narrow
Media"
[SIDE MARGIN] P. 92, "Expanding the Printing Area by Reduc-
ing the Margins"
[MEDIA RELEASE] P. 94, "Using Sticky Media"
P. 78, "Loading a Saved Preset"
To Next Page
Loading...
