4
Part of
Practice
Fully Utilizing the Correction Function
86
Description
The movement distance of media experiences subtle changes due to the thickness of the media and the tem-
perature of the media heating system. When the movement distance becomes discrepant, horizontal stripes
are more likely to occur during printing. We recommend performing correction to match the media you're
using and the media heating system. Repeat the process of printing a test pattern and entering a correction
value several times to nd the optimal value.
You can also make this setting on the RIP software (by, for example,choosing the media type in the software
RIP you are using). When you have made the setting on the software RIP, the software's setting is used and
the machine's setting is ignored.
To Next Page
Loading...
