Loading Media
2
Basic
Operation
45
Pull the loading lever back toward you to
secure the media in place.
3.
Clamp the edges of the media with the media clamp.
Move the left and right media clamps above the edges of the media.
Line up the edges of the media with the centers of the holes of the media clamps.
When you're performing cutting only, never use the media clamps.
P. 65, "Important Note on Cutting"
Important Note When Using the Media Clamps
Insert the media clamps rmly all the way until they engage with an audible click, and make sure they will not
come loose. Incorrect mounting may cause the media to catch or snag and make correct printing impossible,
or may lead to malfunction or poor output quality.
To Next Page
Loading...
