RTI Barracuda - 4.4.2 Display Messages

4. Measurement Principles & Theory
Display Messages and Active Messages
Barracuda & QABrowser Reference Manual
2012-10/4.3A
100
Low signal
The Barracuda detects a signal but it is too low to
present a reliable result.
High kVp
Measured tube voltage is higher than that of the
selected kV-range.
Low kVp
Measured tube voltage is lower than that of the
selected kV-range.
4.4.2 Display Messages
High signal
One or several detectors have too high signal.
· Lower the set sensitivity under settings.
· Reduce the mA and/or increase the distance from tube to
detector.