To Next Page

To Previous Page

2. Description of the Barracuda

Maintenance

2012-10/4.3A

Barracuda & QABrowser Reference Manual

Next, the available detectors

are shown to the left.

When clicking a detector, the

available calibrations will

show up to the right (In this

case the MPD is

highlighted). The TV and TF

columns show an × if there

are calibrations for Tube

Voltage and/or Total

Filtration. The factor column

shows the calibration factor

(for dose in this case).

Here is another example

(R100). This type of detector

only contains a calibration

factor for dose.

2.8.4 Transferring Detector Calibrations

For the Barracuda, the calibration factors for the external detectors are stored inside

the cabinet.

If you have access to more than one cabinet you will need to transfer the detector

calibrations to the other cabinet(s) to be able to use all available detectors with all the

systems.

To transfer a detector:

1. Connect the cabinet, containing the calibrations, to a PC.

2. Start the RTI Detector Manager program (see Managing Detector Calibrations ).

3. Choose Main | File | Export.

RTI Barracuda User Manual

Questions and Answers: