The Barracuda can be used in two different ways:
· As a "meter" with a handheld computer and the QABrowser.
· As a complete "QA-system" with a PC and the oRTIgo software.
This manual describes the Barracuda and the QABrowser. The PC software, oRTIgo,
is described in a separate manual.
The Barracuda system's main features are:
· Very easy and intuitive to use
· Accurate
· No manual corrections are needed
· Measures on all modalities with one detector
· Specially designed measuring modes for pulsed waveforms
· Compact
· QABrowser or oRTIgo is used for control and data processing
· Waveform analyser with high-speed sampling and long storage time
· The modular design guarantee easy upgrade and enhanced serviceability
· RS-232 and USB interface
· Free upgrade of firmware (software in cabinet and modules)
· New and unique design
The modular design makes it very simple to upgrade your Barracuda hardware if you
later need more measuring capacity or when new technology requires new measuring
capabilities. RTI Electronics will continuously add new functions and make
improvements to the Barracuda. Free upgrades of the firmware (the software resident
in the cabinet and measuring modules) are available on RTI Electronics Web site at
http://www.rti.se.
If you have questions, comments, or feel that some functionality is missing, you are
welcome to contact us at RTI Electronics at sales@rti.se. You can of course also call
or send a fax (see notice section for details).
To Next Page
Loading...
Need help?
General