3. Description of the QABrowser
Real-time Display and Waveforms
2012-10/4.3A
63
Barracuda & QABrowser Reference Manual
accomplished by tapping the icon on the graffiti area (or the Tungsten T3, T5, TX
status bar). What is shown here is dependent on selected parameter(s) and used
detectors.
Conditions
Shows general conditions for the measurement. Different values can be shown
depending on selected measured parameter. Details about the Condition screens can
be seen in Settings - Conditions .
Tap Conditions to show the drop-down list with other
settings:
Barracuda: General settings for the Barracuda.
MPD: Specific settings for the MPD detector.
MAS-2: Specific settings for the external probe.
As seen, all detectors in use will show up in this list.
Barracuda
Shows general settings for the Barracuda. You can find
information about the different parameters in Settings -
Barracuda .
To Next Page
Loading...
Need help?
General