1. Operating Procedure
2-11
6-
2-
Delayed Processing screen
This screen appears when "Delayed Start" is selected as
the tissue processing starting method.
[1] Processing status display area
The status of tissue processing is displayed.
During delayed processing, the time to start is displayed.
The illustration of the retort shows the step number and
processing time of the current processing.
The station number and solution name of the current
processing are shown below the retort.
[2] Solution configuration diagram
A solution configuration diagram for the current program
is displayed.
The station number, processing time and solution name
are shown at each station.
Each station is shown in the color preregistered for the
solution group. The station where processing is currently
performed is shown in blue.
[3] View/List Selector button
Use this button to change the station configuration
display mode to list. Touching this button again to
change the mode back to station.
[4] Pause button
Touch this button to pause the instrument.
Touching the button displays the Enter Password
window.
Enter a password within 30 seconds; if not,
the Enter Password window will close.
You can pause the instrument once the password
has been accepted.
To Next Page
Loading...
Need help?
General
