1. Safety Precautions
(e)
Designate the "Instrument Control Manager"
● Operation of this instrument requires expert knowledge of the target application, method of use,
and so on. Therefore, to use the instrument correctly and safely, designate a "Instrument Control
Manager."
● When the instrument is delivered, the Instrument Control Manager should receive explanation on
the handling of the instrument directly from our sales representative.
* Before using the instrument, read "Safety Precautions" to ensure the correct use of the instrument.
* The cautionary instructions provided herein are intended to ensure that the instrument will be used safely
in a manner preventing operator from injury and property damage. These instructions provide important
safety information that must be heeded at all time.
* In this manual, instructions pertaining to different levels of potential hazards are classified as warnings,
cautions and notes and indicated under , , and , respectively. Each class of
instructions is defined below
pertains to a potential hazard where failure to observe the specified instruction may result in death or
serious injury of the operator or other person.
pertains to a potential hazard where failure to observe the specified instruction may result in a serious
injury of the operator or other person.
pertains to a potential hazard where failure to observe the specified instruction may result in damage
to this instrument or other property, or affect the process results.
pertains to an item to pay attention to or other useful information.
* The symbols used on the labels attached to the instrument are explained.
The labels bearing one of the following symbols provide particularly important information you must know
in order to ensure safety of the operator, improve work efficiency and protect the instrument from damage.
Be sure to check these labels and understand the specified instructions before commencing your work
A label bearing this symbol specifies an action that must be taken. Always follow the instruction.
A label bearing this symbol specifies a prohibited item. Always follow the instruction.
A label bearing this symbol indicates that area around them require attention. Improper handling
against the instruction may put the operator in danger or damage the instrument. So be sure to
check the content of this manual and follow the instruction.
A label bearing this symbol is provided near a high-temperature area. Exercise caution against
burns caused by high temperatures.
When this system is used to handle any substance presenting biological hazard, ensure safety
by following the relevant regulations and guidelines in your country or region.
To Next Page
Loading...
Need help?
General
